TCR Arabia - NDT and Material Testing Services in Saudi Arabia
NDT and Material Testing per ASTM API and NACE in Saudi Arabia

Eddy Current Testing Level II Training Class in Saudi Arabia
This course covers ECT probes, ECT Instrumentation and prepares an inspector to perform Tubing Inspections

This course prepares a candidate to
Setup and calibrate equipment
Interpret and Evaluate Results with respect to Applicable Codes, Standards and Specifications
Familiar with the scope and limitations of the Methods
Write test reports



Electromagnetic Theory
Eddy Current Theory
Types of Eddy Current sensing probes

Factors that affect Coil Impedance
Test part

Test system
Field strength
Test coil and shape

Probes Design
Surface Inspection Probes
Tube Inspection Probes

Non Ferromagnetic Tubing Inspection- Conventional ECT
ASME Calibration Standard
Bobbin Probe
Differential and Absolute Inspection
Selection of Probe Size
Selection of ECT frequency
Depth Curves
Sizing if defects

Ferromagnetic Tubing Inspection- Remote Field ECT
RFECT Theory
Selection of Probe Size
Selection of Probe Frequency
Impedance Plane Analysis

ECT Instruments
Minimum requirements for Surface Inspection
Portable Instrumentation
Minimum requirements for Tubing Inspection
Computer Controlled Instrumentation
Sampling Rate and Pull Speed

Codes and Standards
ASME Section V
ASTM Standards

Setting up the Instrument
Selection of Frequencies for Tube Inspection
Selection of Probe Size
Depth Curve
Data Acquisition
Test on Various Samples
Prepare test Report

Practical Tests

Candidates must score a minimum of 70% in each test and a minimum of 80% average for all the three tests.

The duration of this course is for 5 days and it is conducted by NDT experts from TCR Arabia. Students will be given an ECT Level II certificate at the end of this course.

All courses, unless specified in advanced with the client will be conducted at TCR Arabias training room at its office in Dammam located at:

TCR Arabia Company Limited
P.O. Box-3422
# 3 & 4, next to Al Kifah Construction
besides Al-Kadi Tent Factory
near King Abdulaziz Sea Port
Dammam, Kingdom of Saudi Arabia
(T) +966-3-8475784/8475785
(F) +966-3-8475768
(M) +966-504997683
Attention: Syed Ameen Hassan (M) 00966-504997683

Dates for scheduling of each class will be announced when a minimum of at least 6 students sign up for a given batch.